Description
- [Voltage Regulator] Build the voltage regulator below in Proteus and on the breadboard.
- For Vs = 5 V, R = 10 kΩ and RL = ∞, use a voltage meter to obtain the value of VL . Discussion: Whether the obtained VL is reasonable, in comparison to the VZ in the 1N4728A datasheet?
- For Vs = 5 + 0.5sin(2π60 ∙ time), R = 10 kΩ and RL = ∞, display both Vs and VL on oscilloscope. Estimate the line regulation by comparing the amplitudes of Vs and VL. By using the equation: line regulation = RZ⁄(R + RZ), estimate the value of RZ. Discussion: If Vs = 2 + 3sin(2π60 ∙ time), how will VL change?
- For Vs = 5 V and R = 10 kΩ, by gradually decreasing RL, find out the minimum R (RL,min), below which the voltage regulator stops working. Discussion: How to modify the voltage regulator so that RL,min becomes 2 times small
- [Half-Wave Rectifier] Build the half-wave rectifier circuit below in Proteus and on the breadboard.
- ] For Vs = 5sin(2π60 ∙ time) and R = 1 kΩ, find out the value of C so that the ripple voltage (Vr) is smaller than 0.1 V. Display Vout on oscilloscope to confirm Vr is indeed smaller than 0.1 V, and estimate Vdc, Idc, θc, ∆T, Ipeak, Isurge and PIV based on the waveforms. Make sure the half-wave rectifier is reliable, that is Ipeak, Isurge and PIV lower than the maximum ratings from the 1N4007 datasheet.
Discussion: How will Vr change, if Vs = 5sin(2π120 ∙ time)?
N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007
Axial-Lead Glass
Passivated Standard Recovery Rectifiers
This data sheet provides information on subminiature size, axial lead mounted rectifiers for general−purpose low−power applications.
Features
- Shipped in Plastic Bags, 1000 per bag
- Available Tape and Reeled, 5000 per reel, by adding a “RL” suffix to the part number
- Available in Fan−Fold Packaging, 3000 per box, by adding a “FF” suffix to the part number
- Pb−Free Packages are Available
Mechanical Characteristics
- Case: Epoxy, Molded
- Weight: 0.4 gram (approximately)
- Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable Lead and Mounting Surface Temperature for Soldering Purposes:
260°C Max. for 10 Seconds, 1/16 in. from case
- Polarity: Cathode Indicated by Polarity Band
*For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.
LEAD MOUNTED RECTIFIERS
50−1000 VOLTS
DIFFUSED JUNCTION
CASE 59−10
AXIAL LEAD PLASTIC
MARKING DIAGRAM
A = Assembly Location 1N400x = Device Number x = 1, 2, 3, 4, 5, 6 or 7
YY = Year
WW = Work Week
= Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information on page 5 of this data sheet.
© Semiconductor Components Industries, LLC, 2012 1 Publication Order Number:
June, 2018 − Rev. 14 1N4001/D
MAXIMUM RATINGS
| Rating | Symbol | 1N4001 | 1N4002 | 1N4003 | 1N4004 | 1N4005 | 1N4006 | 1N4007 | Unit |
| †Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage DC Blocking Voltage |
VRRM
VRWM VR |
50 | 100 | 200 | 400 | 600 | 800 | 1000 | V |
| †Non−Repetitive Peak Reverse Voltage (halfwave, single phase, 60 Hz) | VRSM | 60 | 120 | 240 | 480 | 720 | 1000 | 1200 | V |
| †RMS Reverse Voltage | VR(RMS) | 35 | 70 | 140 | 280 | 420 | 560 | 700 | V |
| †Average Rectified Forward Current
(single phase, resistive load, 60 Hz, TA = 75°C) |
IO | 1.0 | A | ||||||
| †Non−Repetitive Peak Surge Current (surge applied at rated load conditions) | IFSM | 30 (for 1 cycle) | A | ||||||
| Operating and Storage Junction Temperature Range | TJ
Tstg |
−65 to +175 | °C | ||||||
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. †Indicates JEDEC Registered Data
THERMAL CHARACTERISTICS
| Rating | Symbol | Max | Unit |
| Maximum Thermal Resistance, Junction−to−Ambient | RJA | Note 1 | °C/W |
ELECTRICAL CHARACTERISTICS†
| Rating | Symbol | Typ | Max | Unit |
| Maximum Instantaneous Forward Voltage Drop, (iF = 1.0 Amp, TJ = 25°C) | vF | 0.93 | 1.1 | V |
| Maximum Full−Cycle Average Forward Voltage Drop, (IO = 1.0 Amp, TL = 75°C, 1 inch leads) | VF(AV) | − | 0.8 | V |
| Maximum Reverse Current (rated DC voltage)
(TJ = 25°C) (TJ = 100°C) |
IR | 0.05
1.0 |
10
50 |
A |
| Maximum Full−Cycle Average Reverse Current, (IO = 1.0 Amp, TL = 75°C, 1 inch leads) | IR(AV) | − | 30 | A |
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions.
†Indicates JEDEC Registered Data
Figure 1. Typical Forward Voltage Figure 2. Typical Reverse Current
Figure 3. Typical Capacitance
NOTE 1. − AMBIENT MOUNTING DATA
ORDERING INFORMATION
| Device | Package | Shipping† |
| 1N4001 | Axial Lead* | 1000 Units/Bag |
| 1N4001G | Axial Lead* (Pb−Free) | 1000 Units/Bag |
| 1N4001FF | Axial Lead* | 3000 Units/Box |
| 1N4001FFG | Axial Lead* (Pb−Free) | 3000 Units/Box |
| 1N4001RL | Axial Lead* | 5000/Tape & Reel |
| 1N4001RLG | Axial Lead* (Pb−Free) | 5000/Tape & Reel |
| 1N4002 | Axial Lead* | 1000 Units/Bag |
| 1N4002G | Axial Lead* (Pb−Free) | 1000 Units/Bag |
| 1N4002FF | Axial Lead* | 3000 Units/Box |
| 1N4002FFG | Axial Lead* (Pb−Free) | 3000 Units/Box |
| 1N4002RL | Axial Lead* | 5000/Tape & Reel |
| 1N4002RLG | Axial Lead* (Pb−Free) | 5000/Tape & Reel |
| 1N4003 | Axial Lead* | 1000 Units/Bag |
| 1N4003G | Axial Lead* (Pb−Free) | 1000 Units/Bag |
| 1N4003FF | Axial Lead* | 3000 Units/Box |
| 1N4003FFG | Axial Lead* (Pb−Free) | 3000 Units/Box |
| 1N4003RL | Axial Lead* | 5000/Tape & Reel |
| 1N4003RLG | Axial Lead* (Pb−Free) | 5000/Tape & Reel |
| 1N4004 | Axial Lead* | 1000 Units/Bag |
| 1N4004G | Axial Lead* (Pb−Free) | 1000 Units/Bag |
| 1N4004FF | Axial Lead* | 3000 Units/Box |
| 1N4004FFG | Axial Lead* (Pb−Free) | 3000 Units/Box |
| 1N4004RL | Axial Lead* | 5000/Tape & Reel |
| 1N4004RLG | Axial Lead* (Pb−Free) | 5000/Tape & Reel |
| 1N4005 | Axial Lead* | 1000 Units/Bag |
| 1N4005G | Axial Lead* (Pb−Free) | 1000 Units/Bag |
| 1N4005FF | Axial Lead* | 3000 Units/Box |
| 1N4005FFG | Axial Lead* (Pb−Free) | 3000 Units/Box |
| 1N4005RL | Axial Lead* | 5000/Tape & Reel |
| 1N4005RLG | Axial Lead* (Pb−Free) | 5000/Tape & Reel |
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *This package is inherently Pb−Free.
ORDERING INFORMATION
| Device | Package | Shipping† |
| 1N4006 | Axial Lead* | 1000 Units/Bag |
| 1N4006G | Axial Lead* (Pb−Free) | 1000 Units/Bag |
| 1N4006FF | Axial Lead* | 3000 Units/Box |
| 1N4006FFG | Axial Lead* (Pb−Free) | 3000 Units/Box |
| 1N4006RL | Axial Lead* | 5000/Tape & Reel |
| 1N4006RLG | Axial Lead* (Pb−Free) | 5000/Tape & Reel |
| 1N4007 | Axial Lead* | 1000 Units/Bag |
| 1N4007G | Axial Lead* (Pb−Free) | 1000 Units/Bag |
| 1N4007FF | Axial Lead* | 3000 Units/Box |
| 1N4007FFG | Axial Lead* (Pb−Free) | 3000 Units/Box |
| 1N4007RL | Axial Lead* | 5000/Tape & Reel |
| 1N4007RLG | Axial Lead* (Pb−Free) | 5000/Tape & Reel |
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *This package is inherently Pb−Free.
AXIAL LEAD
CASE 59−10 ISSUE U
DATE 15 FEB 2005
| DIM | INCHES | MILLIMETERS | ||
| MIN | MAX | MIN | MAX | |
| A | 0.161 | 0.205 | 4.10 | 5.20 |
| B | 0.079 | 0.106 | 2.00 | 2.70 |
| D | 0.028 | 0.034 | 0.71 | 0.86 |
| F | −−− | 0.050 | −−− | 1.27 |
| K | 1.000 | −−− | 25.40 | −−− |
NOTES:
- DIMENSIONING AND TOLERANCING PER ANSIY14.5M, 1982.
- CONTROLLING DIMENSION: INCH.
- ALL RULES AND NOTES ASSOCIATED WITHJEDEC DO−41 OUTLINE SHALL APPLY 4. POLARITY DENOTED BY CATHODE BAND.
- LEAD DIAMETER NOT CONTROLLED WITHIN F DIMENSION.
GENERIC MARKING DIAGRAM*
STYLE 1: STYLE 2:
PIN 1. CATHODE (POLARITY BAND) NO POLARITY 2. ANODE
xxx = Specific Device Code
A = Assembly Location
YY = Year
WW = Work Week
*This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “ ”, may or may not be present.
| DOCUMENT NUMBER: | 98ASB42045B | Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. | |
| DESCRIPTION: | AXIAL LEAD | PAGE 1 OF 1 | |
| ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. | |||
© Semiconductor Components Industries, LLC, 2019 www.onsemi.com
| ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. |
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT: TECHNICAL SUPPORT
Email Requests to: [email protected] North American Technical Support: Europe, Middle East and Africa Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 00421 33 790 2910
ON Semiconductor Website: www.onsemi.com Phone: 011 421 33 790 2910 For additional information, please contact your local Sales Representative
1
Mouser Electronics
Authorized Distributo
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
1N4004 1N4005 1N4007 1N4001 1N4001FF 1N4001FFG 1N4001G 1N4001RL 1N4001RLG 1N4002
1N4002FF 1N4002FFG 1N4002G 1N4002RL 1N4002RLG 1N4003 1N4003FF 1N4003FFG 1N4003G 1N4003RL
1N4003RLG 1N4004FF 1N4004FFG 1N4004G 1N4004RL 1N4004RLG 1N4005FF 1N4005FFG 1N4005G
1N4005RL 1N4005RLG 1N4006 1N4006FF 1N4006FFG 1N4006G 1N4006RL 1N4006RLG 1N4007FF
1N4007FFG 1N4007G 1N4007RL 1N4007RLG
Zener Diodes
FEATURES
- Silicon planar power Zener diodes
- For use in stabilizing and clipping circuits with high power rating
- Standard Zener voltage tolerance is ± 5 %
- AEC-Q101 qualified
- Material categorization: for definitions of compliance please see vishay.com/doc?99912
DESIGN SUPPORT TOOLS AVAILABLE APPLICATIONS
- Voltage stabilization
| PRIMARY CHARACTERISTICS | |||||||||||||||||||
| PARAMETER | VALUE | UNIT | |||||||||||||||||
| VZ range nom. | 3.3 to 100 | V | |||||||||||||||||
| Test current IZT | 2.5 to 76 | mA | |||||||||||||||||
| VZ specification | Thermal equilibrium | ||||||||||||||||||
| Circuit configuration | Single | ||||||||||||||||||
| ORDERING INFORMATION | |||||||||||||||||||
| DEVICE NAME | ORDERING CODE | TAPED UNITS PER REEL | MINIMUM ORDER QUANTITY | ||||||||||||||||
| 1N4728A to 1N4764A | 1N4728A to 1N4764A -series-TR | 5000 per 13″ reel | 25 000/box | ||||||||||||||||
| 1N4728A to 1N4764A | 1N4728A to 1N4764A-series-TAP | 5000 per ammopack (52 mm tape) | 25 000/box | ||||||||||||||||
| PACKAGE | |||||||||||||||||||
| PACKAGE NAME | WEIGHT | MOLDING COMPOUND FLAMMABILITY RATING | MOISTURE SENSITIVITY LEVEL | SOLDERING CONDITIONS | |||||||||||||||
| DO-41 (DO-204AL) | 310 mg | UL 94 V-0 | MSL level 1 (according J-STD-020) | Peak temperature max. 260 °C | |||||||||||||||
| ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) | |||||||||||||||||||
| PARAMETER | TEST CONDITION | SYMBOL | VALUE | UNIT | |||||||||||||||
| Power dissipation | Valid provided that leads at a distance of 4 mm from case are kept at ambient temperature | Ptot | 1300 | mW | |||||||||||||||
| Zener current | IZ | PV/VZ | mA | ||||||||||||||||
| Thermal resistance junction to ambient air | Valid provided that leads at a distance of 4 mm from case are kept at ambient temperature | RthJA | 110 | K/W | |||||||||||||||
| Junction temperature | Tj | 175 | °C | ||||||||||||||||
| Storage temperature range | Tstg | -65 to +175 | °C | ||||||||||||||||
| Forward voltage (max.) | IF = 200 mA | VF | 1.2 | V | |||||||||||||||
| ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) | |||||||||||||||||||
| PART NUMBER | ZENER VOLTAGE
RANGE (1) |
TEST
CURRENT |
REVERSE LEAKAGE CURRENT | DYNAMIC
RESISTANCE f = 1 kHz |
SURGE CURRENT (3) | REGULATOR CURRENT (2) | |||||||||||||
| VZ at IZT1 | IZT1 | IZT2 | IR at VR | ZZT at IZT1 | ZZK at IZT2 | IR | IZM | ||||||||||||
| V | mA | mA | μA | V | | mA | mA | ||||||||||||
| NOM. | MAX. | TYP. | MAX. | MAX. | |||||||||||||||
| 1N4728A | 3.3 | 76 | 1 | 100 | 1 | 10 | 400 | 1380 | 276 | ||||||||||
| 1N4729A | 3.6 | 69 | 1 | 100 | 1 | 10 | 400 | 1260 | 252 | ||||||||||
| 1N4730A | 3.9 | 64 | 1 | 50 | 1 | 9 | 400 | 1190 | 234 | ||||||||||
| 1N4731A | 4.3 | 58 | 1 | 10 | 1 | 9 | 400 | 1070 | 217 | ||||||||||
| 1N4732A | 4.7 | 53 | 1 | 10 | 1 | 8 | 500 | 970 | 193 | ||||||||||
| 1N4733A | 5.1 | 49 | 1 | 10 | 1 | 7 | 550 | 890 | 178 | ||||||||||
| 1N4734A | 5.6 | 45 | 1 | 10 | 2 | 5 | 600 | 810 | 162 | ||||||||||
| 1N4735A | 6.2 | 41 | 1 | 10 | 3 | 2 | 700 | 730 | 146 | ||||||||||
| 1N4736A | 6.8 | 37 | 1 | 10 | 4 | 3.5 | 700 | 660 | 133 | ||||||||||
| 1N4737A | 7.5 | 34 | 0.5 | 10 | 5 | 4 | 700 | 605 | 121 | ||||||||||
| 1N4738A | 8.2 | 31 | 0.5 | 10 | 6 | 4.5 | 700 | 550 | 110 | ||||||||||
| 1N4739A | 9.1 | 28 | 0.5 | 10 | 7 | 5 | 700 | 500 | 100 | ||||||||||
| 1N4740A | 10 | 25 | 0.25 | 10 | 7.6 | 7 | 700 | 454 | 91 | ||||||||||
| 1N4741A | 11 | 23 | 0.25 | 5 | 8.4 | 8 | 700 | 414 | 83 | ||||||||||
| 1N4742A | 12 | 21 | 0.25 | 5 | 9.1 | 9 | 700 | 380 | 76 | ||||||||||
| 1N4743A | 13 | 19 | 0.25 | 5 | 9.9 | 10 | 700 | 344 | 69 | ||||||||||
| 1N4744A | 15 | 17 | 0.25 | 5 | 11.4 | 14 | 700 | 304 | 61 | ||||||||||
| 1N4745A | 16 | 15.5 | 0.25 | 5 | 12.2 | 16 | 700 | 285 | 57 | ||||||||||
| 1N4746A | 18 | 14 | 0.25 | 5 | 13.7 | 20 | 750 | 250 | 50 | ||||||||||
| 1N4747A | 20 | 12.5 | 0.25 | 5 | 15.2 | 22 | 750 | 225 | 45 | ||||||||||
| 1N4748A | 22 | 11.5 | 0.25 | 5 | 16.7 | 23 | 750 | 205 | 41 | ||||||||||
| 1N4749A | 24 | 10.5 | 0.25 | 5 | 18.2 | 25 | 750 | 190 | 38 | ||||||||||
| 1N4750A | 27 | 9.5 | 0.25 | 5 | 20.6 | 35 | 750 | 170 | 34 | ||||||||||
| 1N4751A | 30 | 8.5 | 0.25 | 5 | 22.8 | 40 | 1000 | 150 | 30 | ||||||||||
| 1N4752A | 33 | 7.5 | 0.25 | 5 | 25.1 | 45 | 1000 | 135 | 27 | ||||||||||
| 1N4753A | 36 | 7 | 0.25 | 5 | 27.4 | 50 | 1000 | 125 | 25 | ||||||||||
| 1N4754A | 39 | 6.5 | 0.25 | 5 | 29.7 | 60 | 1000 | 115 | 23 | ||||||||||
| 1N4755A | 43 | 6 | 0.25 | 5 | 32.7 | 70 | 1500 | 110 | 22 | ||||||||||
| 1N4756A | 47 | 5.5 | 0.25 | 5 | 35.8 | 80 | 1500 | 95 | 19 | ||||||||||
| 1N4757A | 51 | 5 | 0.25 | 5 | 38.8 | 95 | 1500 | 90 | 18 | ||||||||||
| 1N4758A | 56 | 4.5 | 0.25 | 5 | 42.6 | 110 | 2000 | 80 | 16 | ||||||||||
| 1N4759A | 62 | 4 | 0.25 | 5 | 47.1 | 125 | 2000 | 70 | 14 | ||||||||||
| 1N4760A | 68 | 3.7 | 0.25 | 5 | 51.7 | 150 | 2000 | 65 | 13 | ||||||||||
| 1N4761A | 75 | 3.3 | 0.25 | 5 | 56 | 175 | 2000 | 60 | 12 | ||||||||||
| 1N4762A | 82 | 3 | 0.25 | 5 | 62.2 | 200 | 3000 | 55 | 11 | ||||||||||
| 1N4763A | 91 | 2.8 | 0.25 | 5 | 69.2 | 250 | 3000 | 50 | 10 | ||||||||||
| 1N4764A | 100 | 2.5 | 0.25 | 5 | 76 | 350 | 3000 | 45 | 9 | ||||||||||
Notes
- Based on DC measurement at thermal equilibrium while maintaining the lead temperature (TL) at 30 °C + 1 °C, 9.5 mm (3/8″) from the diode body
- Valid provided that electrodes at a distance of 4 mm from case are kept at ambient temperature
- tp = 10 ms.
BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
Fig. 1 – Admissible Power Dissipation vs. Ambient Temperature Ptot = f (Tamb)
PACKAGE DIMENSIONS in millimeters (inches): DO-41 (DO-204AL)_1N47xx
Document no. S8-V-3901.04-001(4)
Rev. 1 – Date: 30. Nov. 2011
22624
Legal Disclaimer Notice
Vishay Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and al l liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’ s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
N 1
