[SOLVED] MTRN4230-ASSIGNMENT 1

Description

AIMS

1. Read and understand safety documents for operating robots
2. Online training with UR5e
3. Offline configuration of UR5e by use of virtual machine

GETTING STARTED

1. Download attached documents and files
2. Create account in universal robotics
3. Install virtual box
4. Import virtual image given for UR5e

ACTIVITIES

1. SAFETY QA

Read the following document and answer to the below

Questions

1. Explain the steps in “Pre-Use Assessment”? (0.5)
2. Shortlist integrator role in this document? (0.5)
3. Summary modes in the robot? (0.5)

• Read ENG-MECH-RMF-15979 and ENG-MECH-SWP-8948 https://safesys.unsw.edu.au/hs/Lists/healthsafetyforms/DispForm.aspx?ID=16091, https://safesys.unsw.edu.au/hs/Lists/healthsafetyforms/DispForm.aspx?ID=16090 Explain Start Up and Operation(0.5)
  1. Explain Hazard/Task “Robot tool causing damage to user or equipment” (0.5)
  2. Explain Shutting Down(0.5)

2. ONLINE UR5 TRAINING

1. Follow the below steps and upload the certificate as a part of deliverables for this assignment

3. OFFLINE UR5 PRGRAMMING

1. How much is maximum “Active Payload” for UR5? Set it to 15. (0.52)
2. Set
   5. the tool Position to X = 5.1cm, Y= 6.2cm,Z = 0.9cm (0.25)
   6. the tool orientation to RX = 42, RY 32, Rz 30 (0.25)
   7. Centre of gravity to X = 50mm, Y=60mm, Z = 70mm (0.25)
3. Add two digital inputs and name them in1 and in2. Connect in1 to Auto-init and in2 to StopProg. (0.25)
4. Conveyor Tracking to be set to Conveyor1, Encoder Type incremental and conveyor type as Circular (0.25)
5. Set the communication baud rate to 115200 (0.25)
6. Set the home position to Base -247, Shoulder 78, Elbow -87 and Wrist 1 to -151, Wrist 2 to 141 and Wrist 3 to -145 (0. 25)
7. Create a safety plane named Plane 1 based on Feature Base with restrictions as Normal and

Displacement of 12. Note it’s a Restrict Elbow. (3)