Description
Design and develop a program for Parking-Garage charges. A parking garage uses the following rate for the cars, truck, and bus:
CAR BUS TRUCK
First 3 hours
0.00
First 2 hours
2.00
First 1 hours
3.75
After 3 hours
1.25 per hour
After 2 hours
2.50 per hour
After 1hours
4.50 per hour
NO OVER NIGHT PARKING.
OUTPUT DESIGN:
______________________________________
TYPE OF VEHICLE : CAR
TIME IN : HH:MM
TIME OUT: HH:MM
=========================
TOTAL TIME PARKED: HH
TOTAL CHARGES:$999.99
INPUT DESIGN:
______________________________________
TYPE OF VEHCLE:X
HOURS IN :HH
MINUTES IN :MM
HOURS OUT :HH
MINUTES OUT :MM
INPUT VALIDATION: The program should not accept time that has HH less than 0 or greater than 23, and MM less than zero and greater than 59. Number of minutes should be only accepted as a positive number. Only valid vehicle type “C”, “T”, or “B” should be accepted.
IMPORTANT NOTE: If the total_minutes_parked is greater than 0, then you should round the total_hours_parked to the next hour (add one to it.) YOU MUST USE “FUCTION” calls, “if/else” control structures, and “switch” structures.
Items needed for this lab:
1. Problem statement (your version of problem statement), and OUTPUT DESIGN 10%
2. one structure chart (visio document) 10%
3. pseudo-code and flowchart of each module 10%
4. a complete project folder created in IDE with correct executable version of your C++ program 20%
5. Sample of INPUT 10%
6. Sample of OUTPUT 10%
7. User Instruction (at least 250 words.) 10%
8. Comment (your view on program solution, things you learned from this program.) 10%
9. Internal C++ program comments (for every one hundred line of code there should be at least thirty lines of internal comments.) 10%
NOTE: Fully functional programs without syntax and logical errors would receive credit from items 1 – 9, others would receive ZERO (0).
